Type	Ethernet
10Base2 (BNC & Coax, ThinNet):	Yes
10Base5 (AUI & Coax, ThickNet):	No
10BaseT (RJ45 & UTP):	Yes
100BaseTX (RJ45 & UTP):	No
SANA-II Driver:	Yes (ariadne.device and liana.device)
MNI Driver:	Yes (z2-am7990.mni)
Other Driver:	No

The Ariadne is a full length Zorro II card with 32 Kbytes of buffer RAM on board and also an option for a boot EPROM. The Ariadne also includes two parallel ports, which are exactly the same as those found on the A4000. A SANA-II driver called Liana is also supplied for use with the parallel ports, as well as a parnet driver. There may also be a driver supplied for use with Amix, but this has not been confirmed.

Board Layout
   _____________________________________________________________
  |                Parallel Port 2  1234   1      _____         |___
  |                 ############    OOOO   :::   |     |        |
  |     JP1 ..      1               LEDs   LED   |EPROM|        |#
  |     Boot                            Connector|     |        |# DB25
  |                                              |     |        |# Parallel
  |                                              |_____|        |# Port 1
  |                                                             |#
  |                                                             |
  |                                                            #| RJ45
  |                                                            #| 10BASE-T
  |                                                             |_
  |                                                             |_| BNC
  |_____________________________________________________________|   10BASE-2
  |||||||||||||||||||||||||||                                   | Jumpers

  JP1: Enable Boot ROM?
      Off: Set to disable autobooting (default).
       On: Set to enable autobooting from an on-board EPROM.

Connectors

LED connector

Pin	Function
1	LED 1, Twisted pair MAU link status
2	LED 2, Transmit Status
3	+5V
4	LED 3, Collision
5	+5V
6	LED 4, Receive Status

Thanks to Greg Scott