Mirage 3000

Hi Res Version of Front (739 x 2000)
Hi Res Version of Back (742 x 2000)
Hi Res Version of Interior (1383 x 2000)

Dimensions: 430 x 190 x 620 mm
3.5" Bays: 4 (0 with faceplates, see below)
5.25" Bays: 5 (4 with faceplates, see below)
PSU: ATX 300 watt

The Mirage 3000 allows you to place your desktop A3000 in a highly expandable tower, complete with PCI slots and Zorro III slots. The Mirage A3000 makes use of the Mediator 3000 PCI. It also has an active reset button, green power LED and red hard drive LED. Although the tower appears to have two externallly accessible 3.5" drive bays, these are rendered useless because of the size of the A3000 motherboard and the way it is mounted. The same applies to the bottom 5.25" drive bay. Also one of the remaining 5.25" drive bays is reserved for mounting the floppy drive.

A: 4x 3,5" drive bays
B: 300W ATX power supply. Connectors: A3000 motherboard connector, Mediator 3000D connector, 1x 3,5" floppy drive power connector, 4x HD/CD drive power connector
C: Alternative placing for 3,5" drive bays
D: 5x 5,25" drive bays ( accessible from outside )

Copyright Notice:
Parts of this page are (C) Elbox and are used with permission for inclusion in "The Big Book of Amiga Hardware"

Thanks to Elbox, Orjan Lindgren and Paul R. Rezendes