GVP G Force 030 / 68030+SCSI+RAM

Processor: EC030@25Mhz, EC030@40Mhz or 030@50Mhz
FPU: 68882 (PGA) at the same frequency as the processor.
MMU: None for EC030s, Internal in full 030s.
Max Ram: 13MB for 25Mhz version, 16MB for other versions.
Ram Type: 3 x GVP 64pin SIMM Slots plus 1MB surface mounted (for 25Mhz version) or 4MB surface mounted for other versions.

An accelerator designed to plug into the CPU Fast slot of the A2000. The card takes GVP 64pin SIMMs which are not necessarily compatible with the various other 64pin SIMM formats that exist. The card also contains a SCSI-II controller providing both an internal 50pin SCSI connector, and an external DB25 connector. The Combo 030 card is probably the same accelerator as the GVP 030+SCSI+RAM card, and is likely to have been renamed during the product life cycle.

Jumpers

Common To 25, 40 and 50MHz Cards
Jumper Open Closed Default
J2 GForce030 Disabled Enabled Closed
J3 MMU Enabled MMU Disabled Open
J7 Reserved Reserved Open
J8 OmniROM (AT/SCSI) SCSi ROM Open
J9 ROM Disabled ROM Enabled Closed
J10 Reserved Reserved Open
J11 Reserved Reserved Open
J13 Reserved Reserved Open
J14 SCSI Drive Connected SCSI Drive Disconnected Either
J15 Reserved Reserved Open

Common To 25, 40 and 50MHz Cards
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN7 Reserved Reserved 1 & 2
CN14 Reserved Reserved 2 & 3
CN15 Reserved Reserved 1 & 2
CN16 Seperate 882 Clock 68882 Uses CPU Clock 2 & 3

25MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Open
J6 Reserved Reserved Closed
J12 All Banks as Extended Bank 1 or 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 2 & 3

40MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Closed
J6 Reserved Reserved Open
J12 All Banks as Extended Bank 1 or 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 2 & 3

50MHz G-Force Combo Board
Jumper Pins 1 & 2 Pins 2 & 3 Default
J4 Reserved Reserved Closed
J5 Reserved Reserved Closed
J6 Reserved Reserved Closed
J12 All Banks as Extended Banks 1 & 2 as Auto-Config Closed
Jumper Pins 1 & 2 Pins 2 & 3 Default
CN8 Reserved Reserved 1 & 2

Thanks to Lupták, Giaste