Hi Res Version of front (2000 x 693)
Hi Res Version of back (2000 x 710)
| Processor: | 060@50Mhz |
| FPU: | Internal |
| MMU: | Internal |
| Max Ram: | 128MB |
| Ram Type: | 4 x 72pin SIMM sockets. |
The DKB Wildfire is designed to plug into the CPU Fast Slot of the A2000 and is probably the most powerful accelerator ever released for the A2000. The DKB Wildfire contains a local PCI bus for attaching a custom PCI graphics card called the Inferno, a built in ethernet card (RJ45 10BaseT, optional 10Base2 adaptor) and a built in Fast SCSI-II controller which an internal 50pin SCSI connector and an external 50pin SCSI connector. The two black connectors on the rear of the card, are probably the local PCI slots, for attaching things like the Inferno. This accelerator requires at least Amiga OS3.1 in order to work correctly.
- Local PCI bus transfers at up to 70MB/sec
- Ethernet transfers at up to 1MB/sec
- SCSI transfers at up to 10MB/sec
- 3 CHIP Flash ROM for driver updates.
Jumpers
| Jumper | On | Off |
|---|---|---|
| JP101 | Factory Testing | Default |
| JP102 | Pins 1 and 2 Enable FlashROM Writes |
Pins 2 and 3 Disable FlashROM Writes |
| JP103 | Default | Factory Testing |
| JP104 | 70/80ns RAM | 60ns RAM |
| JP201 | Default | Factory Testing |
| JP401 | Default | Factory Testing |
| JP506 | Hard Drive LED Connector Only (input from 2nd HD Controller) | |
| JP507 | Hard Drive LED Connector Only |
Thanks to http://www.vgr.com/wildfire/
