Standard Specifications
| Case Type: | Set Top Box / VCR |
| Processor: | Unknown |
| MMU: | Unknown |
| FPU: | Unknown |
| Chipset: | ECS (plus additional chips Grace and Beauty) |
| Kickstarts: | V2.05 |
| Expansion Slots: | 1 x FMV slot 1x Video Slot 1 x PCMCIA styled connector. Note, this is NOT a true PCMCIA connector, only very early experimental units ever contained a true PCMCIA slot |
| Standard CHIP RAM: | 2MB |
| RAM sockets: | Unknown |
| Hard Drive Controllers: | 1 x (2.5"??) IDE Controller |
| Drive Bays: | 1 x 3.5" 1 x 5.25" |
| Expansion Ports: | 1 x Mini-Din Serial 1 x 25pin Parallel 1 x 23pin RGB Video 1 x S-Video 1 x Composite 1 x 23pin External Floppy 2 x RCA Audio (Left/Right) 1 x MIDI IN/OUT 1 x 3.5mm Heaphone Socket |
| Floppy Drive: | 1 x Internal 880k Floppy Drive |
| Motherboard Revisions: | Unknown |
| Battery Backed Up Clock: | Unknown |
The CDTV-II, perhaps correctly called the CDTV-CR (CR = Cost Reduced) was intended as the successor to the original CDTV. Unfortunately like many of Commodore's projects it was never officially released to the public. Like the original, the CDTV-II also includes an infra-red remote controller but it also has a digital LCD display on the front and a built-in floppy drive which the original doesn't have. The CDTV-II does not have a keyboard port, or a mouse port like the original model.
Thanks to Nominoua