Pictures shows the rear of the card

Processor:	EC030@40Mhz or 030@50Mhz
FPU:	Optional 68882 (PGA and PLCC)
MMU:	None in EC030s, Internal in full 030s.
Max Ram:	64MB
Ram Type:	2 x 72pin SIMM slots.

An accelerator which plugs into the trapdoor slot of the A1200. An optional Fast SCSI-II controller is also available.

Jumpers

MapRom

If memory is installed on the Blizzard 1230-II you can load Kickstart into the faster RAM to speed up the execution of operating system functions. If the MAPROM jumper is removed, Kickstart will be automatically copied over to the RAM. If the jumper is installed Kickstart will be executed on the ROM.

FPU-Clock

In position 2-3 the co-processor is operated synchronously, with the central processor clock. If you want to use a co-processor with another clock rate this jumper must be set to position 1-2. For asynchronous operation a second oscillator must be installed.

RAM Configuration

Bank1 Bank2 Jumper total leer leer 0MB 1MB leer 1MB 2MB leer 2MB 4MB leer 4MB 8MB leer 8MB 16MB leer 16MB 32MB leer 32MB 1MB 1MB 2MB 2MB 1MB 3MB 4MB 1MB 5MB 8MB 1MB 9MB 16MB 1MB 17MB 32MB 1MB 33MB 2MB 2MB 4MB 4MB 2MB 6MB 8MB 2MB 10MB 16MB 2MB 18MB 32MB 2MB 34MB 4MB 4MB 8MB 8MB 4MB 12MB 16MB 4MB 20MB 32MB 4MB 36MB 8MB 8MB 16MB 16MB 8MB 24MB 32MB 8MB 40MB 16MB 16MB 32MB 32MB 16MB 48MB 32MB 32MB 64MB

Thanks to Daniel O'Conner